Description
FALCON TEST ENGINEERS REPORT No.: |
4048 | ||||||
CONFIGURATION OF PACKAGING: |
|||||||
Option 1 – BPR-BIO-FF (Old Code)
Four absorbent pads and re-sealable plastic bag are placed inside each of the ‘Hazpak’ 1 L HDPE jars and the lids screwed closed. The 1 L HDPE rectangular jars are inserted into the EPS insulating box and closed. Close and seal the outer fibreboard box with 48 mm pressure sensitive self adhesive tape in the same manner that the base of the box has been sealed. Add the required amount of absorbent material if specified. Label the box as required. If using dry ice, the box should be pierced in the position marked to allow for venting. (Make sure that the labels or any other markings are not obliterated or obscured in any way).
Note: The use of other packaging methods or components may render the approval of this package invalid. |
Option 2 – DSR-TS-27 (Old Code)
Four absorbent pads and re-sealable plastic bag are placed inside the ‘Hazpak’ 2 L HDPE jar and the lid screwed closed. The 2 L HDPE jar is inserted into the EPS insulating box and closed. Close and seal the outer fibreboard box with 48 mm pressure sensitive self adhesive tape in the same manner that the base of the box has been sealed. Add the required amount of absorbent material if specified. Label the box as required. If using dry ice, the box should be pierced in the position marked to allow for venting. (Make sure that the labels or any other markings are not obliterated or obscured in any way).
Note: The use of other packaging methods or components may render the approval of this package invalid.
|
Option 3 – ISR-MINI-FF (Old Code)
‘Hazpak’ tube sets are inserted into the EPS cage support system and the EPS insulating box closed. Close and seal the outer fibreboard box with 48 mm pressure sensitive self adhesive tape in the same manner that the base of the box has been sealed. Add the required amount of absorbent material if specified. Label the box as required. If using dry ice, the box should be pierced in the position marked to allow for venting. (Make sure that the labels or any other markings are not obliterated or obscured in any way).
Note: The use of other packaging methods or components may render the approval of this package invalid.
Note: EPS cage support system not supplied |
|||||
MARKINGS & APPROVAL: |
|||||||
Approval No.: |
N/A | ||||||
UN Markings: |
N/A | ||||||
Packing Group: |
N/A | ||||||
S.G.: |
N/A | ||||||
Internal Test Pressure: |
N/A | ||||||
PRODUCT DIMENSIONS: |
|||||||
Dimensions: |
310 (L) x 220 (W) x 285 (H) mm |
Mass of Empty Package: |
505 grams | ||||
Nominal Volume: |
0.019 m3 per unit |
Bulk Equivalent: |
4.8 kg (@ 250 kg/m3) |