RF-IP2-TS

Refurbishment Only – Primary and Secondary Packaging System with 30 mL HDPE round tube with 28 mm tamper evident screw closure and cello wad seal (Primary Receptacle), 110 mL HDPE round tube with 38 mm tamper evident screw closure and cello wad seal (Secondary Package), cushioning plug and absorbent pad approved for use with ‘Hazpak’ 620/650 Ambient Temperature and Insulated Specimen Transport Packaging systems only.

Note: The tube sets are supplied sterilised. Primary receptacle supplied with patient information label. Manufactured from materials that contain no contaminates. Can be used to grow cultures. Alternatively, small laboratory vials or specimen receptacles can be placed inside the 30 mL tube.

Download Document

Description

 FALCON TEST ENGINEERS REPORT No:

 523, 524, 530 and 531

 CONFIGURATION OF PACKAGING:

Place the 30 mL HDPE round tube inside the 110 mL HDPE round tube. Close and seal the tube with the 38 mm tamper evident screw closure.
MARKINGS & APPROVAL:
 

Approval No.:

N/A
 

UN Markings:

N/A
 

Packing Group:

N/A
 

S.G.:

N/A
 

Internal Test Pressure:

180 kPa at Ambient and -95 kPa at +55O C and -40 O C

 PRODUCT DIMENSIONS:

Dimensions:

177 (H) x 42 (Dia) mm

Mass of Empty Package:

117g

Nominal Volume:

0.003 m3 per unit

Bulk Equivalent:

0.8 kg (@ 250 kg/m3)
Internal Orifice Dimensions: 22 mm (Dia)
LIST OF COMPONENTS:

 

  30 mL HDPE round tube with 28 mm tamper evident screw closure and cello wad seal
  110 mL HDPE round tube with 38 mm tamper evident screw closure and cello wad seal
  Yellow Hazpak Potential Biological Hazard label Absorbent Crystals
  White Hazpak Patient information label Cushioning Plug
  Printed ‘Sterilized’ plastic bag.  
 ASSEMBLY OF PACKAGING:
Assemble the 30 mL HDPE round tube by attaching the Hazpak patient information label along the outside of the tube. Close and seal the tube by screwing close the 28 mm tamper evident screw closure. Attach the cushioning plug to the inside of the 38 mm tamper evident screw closure making sure it is in the centre. Assemble the 110 mL HDPE round tube by attaching the Hazpak potential biological hazard label along the outside of the tube. Place the absorbent crystal pad inside and followed by the complete 30 mL HDPE round tube. Close and seal the tube by screwing close the 28 mm tamper evident screw closure. Place the tube set inside the printed ‘Sterilized’ plastic bag and heat seal the end closed.
PRIMARY RECEPTACLE:
 

Receptacle Product Code:

TS-IP2-0.03L-28TE

Qty:

1
 

Closure Product Code:

CLOS-28TE

Qty:

1
 

Description:

30 mL HDPE round tube with 28 mm tamper evident screw closure and cello wad seal.
 

Dimensions:

17 (Dia) x 140 (H) mm

Internal Diameter:

22 mm
 

SECONDARY PACKAGE:

 

Receptacle Product Code:

TS-IP2-0.11L-38TE

Qty:

1
 

Closure Product Code:

CLOS-38TE

Qty:

1
 

Description:

110 mL HDPE round tube with 38 mm tamper evident screw closure and cello wad seal.
 

Dimensions:

42 (Dia) x 177 (H) mm

Internal Diameter:

32 mm

 ABSORBENT MATERIAL

 

Product Code:

AP-CRYSTAL-70×60

Material:

Crystals

 

Description:

Absorbent crystals inside sachet.

 

Dimensions

70 (L) x 60 (W) mm

Qty:

1

 CUSHIONING PLUG:

 

Product Code:

TS-FM-PLUG

Qty:

1
 

Description:

Round foam protective pad.

 

Dimensions:

10 (H) x 30 (Dia) mm
 Bag:
 

Product Code:

TS-5H4-260×90

Qty:

1
 

Description:

Printed ‘Sterilized’ plastic bag.
 

Dimensions:

190 (W) x 260 (L) mm x 50 um
LABEL:

 

 

Product Code:

TS-LAB-SEC-70×35

Qty:

1
 

Description:

Yellow Hazpak Potential Biological Hazard label.

 

Product Code:

TS-LAB-PRI-70×35

Qty:

1
 

Description:

White Hazpak Patient information label.